XC Flex Weapon Short Track Blade
Tax excluded. Shipping calculated at checkout
The XC Flex is built around its pillars. Connected and wider than the XQ's, they spread pressure across the whole length of the blade, so a push loads the runner evenly instead of concentrating under the boot.
What connected pillars do
On the XC the pillars are joined and slightly wider than on the XQ. That changes how load travels through the tube: pressure is distributed along the blade rather than peaking under the mounting points. In practice it means better power transfer on the straight and a blade that holds a line under load in the corner. The flex is kept in the lips while the top of the tube stays rigid, which is what produces the control-without-losing-speed balance the XC is bought for.
Which steel
Full PM (64 HRC) or Bi-metal/PM (66 HRC). Both give grip in the corner, smooth turning and long edge life; the harder option lasts longer between sharpenings.
Precision Bend Technology
Pre-bent to an accurate and consistent radius with our own Precision Bend Technology, so the blade you receive is measurable rather than approximate.
Where it sits in the range
Alongside the XQ in price and above it in pressure distribution. Below the XC Firm, which stiffens the pillars further for heavier skaters. Take the XC Flex if you want control and speed in the same blade; take the XC Firm if your blades give way under you.
Specification
| Discipline | Short track |
|---|---|
| Family | C family - flex in the lips, rigid top of tube, connected wider pillars |
| Tube | Highest-grade aluminium sourced in the EU |
| Runner steel | Full PM (64 HRC) or Bi-metal/PM (66 HRC), hand-selected |
| Bend | Pre-bent with Precision Bend Technology |
| Blade lengths | 16.5, 16.75, 17.0, 17.25, 17.5, 17.75, 18.0 inch |
| Mounting | 165 mm (6.5 inch) separation |
| Cups | Aluminium PRO cups, lighter and stiffer, multiple heights available |
| Colours | Grey Blue |
| Origin | Built start to finish in-house at Hagen Techniek, Heemskerk, the Netherlands |
BLADES
- Sharpen blades regularly for optimal performance. We recommend professional sharpening services.
- Inspect blades for any signs of damage or wear before each use.
- Customise blade alignment based on personal skating style for enhanced stability.
GENERAL CARE
- Wipe blades dry after each session to prevent rusting.
- Store skates in a cool, dry place to maintain their condition.
- Replace worn-out components promptly to ensure continued safety and performance.
LONG TRACK VS. SHORT TRACK
- Long track: opt for slightly longer blades to maximise gliding efficiency.
- Short track: shorter blades provide agility and quick manoeuvring on the tight turns of the track.
EXPERT TIP
- Contact us for personalised advice on sizing and maintenance.
- Invest in skate guards to protect blades during off-ice transport.
If you have any questions or need assistance, email info@ehs-staybent.com.
Precision. We craft speed skating boots and blades with precision, so that every detail is tuned for performance.
Innovation. Because the machine shop is ours, we can test new materials and design concepts and put them into production ourselves.
Quality. Every pair of boots and blades is built to the same standard of durability and performance.
Customisation. Every skater is different, so much of the range can be specified to the individual athlete.
Support. We answer our own email, we support our dealers on warranty and service, and we stock spare parts.